Self-regulating Anti-freeze Pipe Heating Cable Pipe Frost Protection 220v Heating Cable Mini Intelligent Controller

 Features:
1. The heating cable can prevent the freeze of the pipe and enable water to flow normally below 0°C

5. Reliable operation 

8. This system can be installed with confidence and with the assurance that it will operate for years.

Installation:
First, unwind the heating cable. The cable must never be connected to the power line when it is wound up.
If the cable is too inflexible because of low temperatures, unwind it and put it for some minutes into the plug.
Afterwards, you can pass the cable, the area around the pipe where you want to connect it with the cable must be accessible and non-attached.
the heating cable can not be passed behind walls
put the thermostat with the round black contact area tightly on the coolest point of the pipe and fix it with insulating tape.
finally put the whole cable on the pipe and fasten it every 30~60cm with insulating tape.

Attention: the cable must be fastened straight on the pipe now you can check if your cable works. afterward, insulate the water pipe and the heating cable with mineral rock wool or foam.
Attention: never use more than 13mm of this material to insulate.in general, the heating cable must be protected against mechanical damage or biting. the heating cable can not be put into liquids. finally, plug the cable into a 230V main plug.