Skip to product information

    Automatic Stainless Steel Float Valve for Water Tank and Tower Level Control

    €16,99 EUR
     per 
    In stock!
    Wiring Control: Upper Water Inlet
    Specification: 1/2"

    Product description

    Emphasize the precise control ability of the product, without the need for manual adjustment.

    Description:
    Auto function - Flair-gorgeous the float valve automatically refills water for your water tank,water tower,livestock,animal water drinker when water drops below the valve level. Once it reaches the valve, it would automatically stop refilling water,so it will shut-off when the water reaches the internal float.
    Easy to install - It's a mini float valve,Flair-gorgeous branded ball size is small,so easy to install,the male thread are 1/2" and 3/4", we used BSP pipe thread,also the male thread is longer,it's perfectly to fit most of BSP thread connections. If your pipe thread is NPT,you just need to add a few PTFE TAPES on the male thread,then it works perfectly as well.
    No electricity needed - A ball float valve inside allows water to flow until a specific level is reached. Once the water reaches this level, the float valve will be pushed up with water due to buoyancy and stop the flow of water. When the water level starts dropping, the valve will open again, and the water will start to flow again,so no need electricity.
    Widely used - It's used for people to maintain the water level in a garden waterfall, on a yard fountain,for a rain gutter garden project,using it to make an automatic shut-off for swimming pools,for chicken coops,for automatic chicken water drinker,for cattle watering drought,for rain collection barrels in the outdoors etc.
    Working Water Pressure - The float valve works with 10psi to 150 psi water pressure,if water pressure is too low or too large,the float valve will not suitable for using, it will not work or be damaged. Working Temperature: 0°C~100°C.
    Easy maintenance - The float valve comes with filter,It can automatically filter sand and stones and will not block the faucet.
    Safety and environmental protection - We used stainless steel as the valve body, used stainless steel screw, never rust,very safe.

    Specifications:
    Product packaging: boxed
    Product material: 304 stainless steel
    Applicable temperature: 0-100 ℃
    Pressure range: 0.2-8kg
    Thread size: 1/2,3/4 (optional)
    Product size:
    1/2in: 90*48mm/3.54 * 1.88inch
    3/4in: 20*25mm/0.78 * 0.98inch

    Package list:
    1 * Faucet
    1 * Connector
    1 * Thread seal tape

    Notes:
    1. Please allowed 1-3mm differences due to manual measurement, thank you for your understanding!
    2. Due to the difference between different monitors, please understand that.

    View full details

    Automatic Stainless Steel Float Valve for Water Tank and Tower Level Control

    Customer Reviews

    Based on 11 reviews
    82%
    (9)
    18%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    S
    Sakshin de Groot
    works great

    Nothing more to say than that im a happy customer.

    m
    marco vanoli
    Stainless stell float valve for water…

    Fantastic !!! Professional approach, perfect timing, good product !!!

    J
    John Gerber

    Works great. The wire bracket holds well unless you have animals nosing or pushing on the hose or float valve. But the valve itself works great and was an upgrade from the older float valve we had purchased at the farm store.

    R
    Robert Brown

    Got tired of replacing old fashioned floats in our swamp cooler, this works great!

    H
    Huskey

    I use this to keep my Koi pond at the same level despite evaporation and waterfall water loss. I have a hose running to it and a hose thread to pipe thread converter where it is attached to the side of the pond.